# How to find, clean and extract fossils

> Step-by-step guide to fossils in Legends of Eldruva: find a deposit, expose a bone without breaking it, clean it in 10 strokes, extract it and mount a skeleton.

URL: https://www.legendsofeldruva.com/guide/fossils/
Updated: 2026-11-20

To extract a fossil you dig down to the bone with a pickaxe, stop before hitting it, clean it 10 times with a field kit, clear the 8 cells around it at the same level and press <kbd>F</kbd>. Then you mount the pieces in the bestiary (<kbd>F8</kbd>) and place the skeleton with <kbd>P</kbd>.

1. **Find a deposit.** Each 128 m region has 6 deposits between 3 and 29 m deep. Examine traces with <kbd>N</kbd> as you dig; they hint at what is near.
2. **Dig down beside it.** Use the pickaxe on the ground around the bone, not on it. Every pickaxe hit on a bone adds damage; ten destroy it.
3. **Switch to the field kit.** Select it in the hotbar and hold the left button on the bone: 10 strokes clean one cell.
4. **Clear the ring.** The 8 cells around the piece at the same height must be open.
5. **Extract.** Press <kbd>F</kbd>. The piece goes to your bag with a quality based on its damage.
6. **Store and mount.** Keep pieces safe in the storage bank (<kbd>B</kbd>), then open the bestiary (<kbd>F8</kbd>) to assemble them.
7. **Display.** Press <kbd>P</kbd> to place the skeleton in the world.

## Kits

| Kit | Uses | Note |
| --- | --- | --- |
| Field kit | 100 | Every explorer starts with one |
| Silver kit | 400 | |
| Mithril kit | 5000 | Platinum and mithril need a kit of their level |

## Common mistakes

- **Hitting the bone with the pickaxe.** Switch tools as soon as the bone shows.
- **Leaving the ring closed.** Extraction fails until the 8 cells around the piece are clear.
- **Running out of kit.** Watch the uses left and buy or craft another before a long dig.
