How to find, clean and extract fossils
Published · Updated
To extract a fossil you dig down to the bone with a pickaxe, stop before hitting it, clean it 10 times with a field kit, clear the 8 cells around it at the same level and press F. Then you mount the pieces in the bestiary (F8) and place the skeleton with P.
Play now in your browser Play with friends
- Find a deposit. Each 128 m region has 6 deposits between 3 and 29 m deep. Examine traces with N as you dig; they hint at what is near.
- Dig down beside it. Use the pickaxe on the ground around the bone, not on it. Every pickaxe hit on a bone adds damage; ten destroy it.
- Switch to the field kit. Select it in the hotbar and hold the left button on the bone: 10 strokes clean one cell.
- Clear the ring. The 8 cells around the piece at the same height must be open.
- Extract. Press F. The piece goes to your bag with a quality based on its damage.
- Store and mount. Keep pieces safe in the storage bank (B), then open the bestiary (F8) to assemble them.
- Display. Press P to place the skeleton in the world.
Kits
| Kit | Uses | Note |
|---|---|---|
| Field kit | 100 | Every explorer starts with one |
| Silver kit | 400 | |
| Mithril kit | 5000 | Platinum and mithril need a kit of their level |
Common mistakes
- Hitting the bone with the pickaxe. Switch tools as soon as the bone shows.
- Leaving the ring closed. Extraction fails until the 8 cells around the piece are clear.
- Running out of kit. Watch the uses left and buy or craft another before a long dig.